The envisionCAM™ is a high Definition Video Event Data Recorder that records accidents and aggressive driving 20 seconds before and 30 seconds after an event with a dual lens to capture both inside and outside the vehicle.

The envisionCAM™ is an amazing product that includes automatic wireless downloads, GPS with Google Earth™, Night Vision, USB, Ultra wide angle lens, Dual image processors, and an extremely robust design.

Includes:  Camera, GPS power cable, Bracket, Security screws, Software, 30 Day Money back Guarantee, 1 Year Mfg. Warranty.

The envisionCAM™ GPS Cable is 10 feet in length and incorporates an external GPS receiver to maximize the GPS signal strength.  The required wiring connects to power, ground, and ignition power.  In addition, the door/meter wire and external panic wire can be connected (optional, but included with purchase).  The GPS connects to the camera using a high quality Molex connector surrounded by a strain relief.  The connector permanently locks into the envisionCAM unit to prevent tampering.

The envisionCAM™ Bracket is mounted to the windshield and is designed to withstand hundreds of pounds of force.  The Bracket is constructed of high quality black anodized aluminum which includes 8 different positioning holes complimenting the 6 metal inserts located on the side of the envisionCAM™.  This ensures that the screws are securely fastened to metal instead of plastic.

The envisionCAM™ Security Screws are tamper-resistant and require a special security tool to remove (provided).  The screws are mounted through three holes on each side of the bracket and into three metal inserts on each side of the camera.

The envisionCAM™ USB Cable is 6 feet in length with a mini USB cable on one side and a standard USB cable on the other.  The mini USB side connects directly to the camera and the standard USB side connects to a computer.  This cable is used to initially set each envisionCAM to the computer, to program the envisionCAM config settings, and to allow for manual downloads.

The envisionCAM™ 12 VDC, 1.3AH Rechargeable Backup Battery is designed to keep the envisionCAM™ in operation after a primary battery failure.  This battery is only 4 inches in length, so it can be stored in a location that is hidden and protected.  This accessory is not included as part of the purchase of the envisionCAM™ System and is sold separately.